Find Center of Mass for Uniform Log: 2.33m, 94.9kg, 72.7kg, 26.1kg

In summary, the problem involves finding the center of mass of a uniform log of length 2.33 m and mass 94.9 kg floating in water. A man weighing 72.7 kg is standing 18.9 cm from one end, and his daughter (weighing 26.1 kg) is standing 1.15 m from the other end. The center of mass is calculated using the formula m1r1+m2r2/(m1+m2)=R, where m1 and m2 are the masses and r1 and r2 are the distances from the origin. The origin is chosen to be the center of the log, and the distances are measured from there.
  • #1
Barrynew
1
0
A uniform log of length 2.33 m has a mass of 94.9 kg and is floating in water. Standing on this log is a 72.7-kg man, located 18.9 cm from one end. On the other end is his daughter (m = 26.1 kg), standing 1.15 m from the end. Find center of mass

2. m1r1+m2r2/(m1+m2)=R



3. I used (1.15)*26.1+72.7*0.189/(26.1+72.7+94.9)
the answer is not right...Need some help. Thank you!
 
Physics news on Phys.org
  • #2
Hi Barrynew, Welcome to Physics Forums.

First you should establish your coordinate system. Where is the origin from which you want distances to be measured (so when you say something like "the position of the center of mass is X", everyone will be able to agree where X is to be measured from).

It would appear from the equation that you've written that you want the center of the 94.9 kg log to be where your origin is located. Why? Because you've not included an offset for the log's center of gravity in the numerator of your calculations but have included the mass of the log in the denominator...

Next, the problem statement is not clear about where things are measured from! The man is located at a distance of 18.9 cm from one end of the log. Fine. But then it says, "On the other end is his daughter ... standing 1.15 m from the end". Are we to understand that the daughter is standing 1.15 m from the "other" end, or 1.15 m from the same end that the man is standing? My guess would be they intended 1.15 m from the "other" end.

Once you've established your coordinate system, write all distances in terms of that system! You'll want to know how far the man is from the origin, and how far his daughter is from the origin. Those are the distances that go into your center-of-mass formula.
 

Related to Find Center of Mass for Uniform Log: 2.33m, 94.9kg, 72.7kg, 26.1kg

1. What is the formula for finding the center of mass of a uniform log?

The formula for finding the center of mass of a uniform log is: xcm = (m1x1 + m2x2 + m3x3 + ...) / (m1 + m2 + m3 + ...), where xcm is the center of mass, m1, m2, m3, etc. are the masses of each section of the log, and x1, x2, x3, etc. are the distances of each section from a chosen reference point.

2. What are the units for the center of mass of a uniform log?

The units for the center of mass of a uniform log are the same as the units used for distance, since it is a measurement of the location of the log's balance point. This could be in meters, centimeters, or any other unit of distance.

3. Can the center of mass of a uniform log be located outside of the log's physical boundaries?

No, the center of mass of a uniform log will always be located within the log's physical boundaries. This is because the center of mass is calculated using the distribution of mass within the log, and all of the log's mass is contained within its boundaries.

4. How does the center of mass of a uniform log change if the log is cut into smaller sections?

The center of mass of a uniform log will remain in the same location, regardless of how the log is cut into smaller sections. This is because the distribution of mass within the log remains the same, and the center of mass is only affected by the location and mass of each section.

5. Is it possible for a uniform log to have more than one center of mass?

No, a uniform log will only have one center of mass. This is because the log is uniform in shape and density, meaning that the distribution of mass within the log is the same throughout. Therefore, there can only be one point where the log is perfectly balanced.

Similar threads

  • Introductory Physics Homework Help
Replies
16
Views
728
  • Introductory Physics Homework Help
Replies
2
Views
844
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
5K
  • Introductory Physics Homework Help
2
Replies
57
Views
4K
  • Introductory Physics Homework Help
Replies
2
Views
3K
  • Introductory Physics Homework Help
Replies
7
Views
2K
Replies
6
Views
917
  • Introductory Physics Homework Help
Replies
8
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
4K
Back
Top