Centripetal force on a top down loop

In summary: The question is asking for the actual speed at the top of the loop, given that the normal force is 300 N.
  • #1
onyxorca
20
0

Homework Statement



A special electronic sensor is embedded in the seat of a car that takes riders around a circular loop-the-loop at an amusement park. The sensor measures the magnitude of the normal force that the seat exerts on a rider. The loop-the-loop ride is in the vertical plane and its radius is 18 m. Sitting on the seat before the ride starts, a rider is level and stationary, and the electronic sensor reads 950 N. At the top of the loop, the rider is upside-down and moving, and the sensor reads 300 N. What is the speed of the rider at the top of the loop?

Homework Equations



a=v^2/r

The Attempt at a Solution



950/9.8=96 kg

300=790-96(v^2/18)

?
 
Physics news on Phys.org
  • #2
onyxorca said:

Homework Statement



A special electronic sensor is embedded in the seat of a car that takes riders around a circular loop-the-loop at an amusement park. The sensor measures the magnitude of the normal force that the seat exerts on a rider. The loop-the-loop ride is in the vertical plane and its radius is 18 m. Sitting on the seat before the ride starts, a rider is level and stationary, and the electronic sensor reads 950 N. At the top of the loop, the rider is upside-down and moving, and the sensor reads 300 N. What is the speed of the rider at the top of the loop?

Homework Equations



a=v^2/r

The Attempt at a Solution



950/9.8=96 kg

300=790-96(v^2/18)

?
I'm not sure where your 790 figure is coming from. You must look at the forces acting on the rider at the top of the loop. What are the 2 forces? In which direction do they act? What's the net force and the direction of the net force? In which direction is the centripetal acceleration? Then use Newton's 2nd law.
 
  • #3
Fn=Fc-Fg

Fn=mv^2/r-mg

300=mv^2/r-950

mv^2/r=300+950

v=sqrt((300+950)r/m)

=15.2350 m/s ?
 
  • #4
onyxorca said:
Fn=Fc-Fg

Fn=mv^2/r-mg

300=mv^2/r-950

mv^2/r=300+950

v=sqrt((300+950)r/m)

=15.2350 m/s ?
Looks good, nice work! you should round off your answer to maybe v =15m/s
 
  • #5
I thought at the top it would be Fn+Fg=mv^2/r
and then Fg is the only force acting because of centripetal acceleration and it is free fall for an instant... so Fn=0?
 
Last edited:
  • #6
bonz said:
I thought at the top it would be Fn+Fg=mv^2/r
That is corrrect, both the normal and gravity forces act downward toward the center of the circle, so their sum provides the net centripetal force
and then Fg is the only force acting because of centripetal acceleration and it is free fall for an instant... so Fn=0?
It is given that the nornal force is 300 N at the top of the loop, so why are you setting it equal to 0?? Setting the normal force equal to 0 will give you the absolute minimum speed required to keep the coaster and rider moving in a circle, but that is not what is being asked in this problem.
 

Related to Centripetal force on a top down loop

1. What is centripetal force?

Centripetal force is the force that keeps an object moving in a circular path. It acts towards the center of the circle and is necessary for an object to maintain its circular motion.

2. How does centripetal force apply to a top down loop?

In a top down loop, centripetal force is responsible for keeping the object (such as a roller coaster car) on the track and preventing it from flying off the loop. It acts as the inward force that counteracts the object's tendency to continue moving in a straight line.

3. What factors affect the magnitude of centripetal force in a top down loop?

The magnitude of centripetal force in a top down loop depends on the velocity of the object, the mass of the object, and the radius of the loop. The greater the velocity and the mass, or the smaller the radius, the greater the centripetal force required to keep the object on the loop.

4. Can centripetal force be greater than the weight of the object in a top down loop?

Yes, it is possible for centripetal force to be greater than the weight of the object in a top down loop. In fact, this is necessary in order for the object to maintain its circular motion and not fall off the loop.

5. How is centripetal force calculated for a top down loop?

The centripetal force in a top down loop can be calculated using the formula Fc = mv^2/r, where m is the mass of the object, v is its velocity, and r is the radius of the loop. This formula can also be rearranged to solve for any of the variables if the other two are known.

Similar threads

  • Introductory Physics Homework Help
Replies
16
Views
2K
  • Introductory Physics Homework Help
Replies
9
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
13K
Replies
10
Views
2K
  • Introductory Physics Homework Help
Replies
3
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
2K
Replies
12
Views
2K
  • Introductory Physics Homework Help
Replies
12
Views
11K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
9
Views
2K
Back
Top