Car mileage after reducing Drag Coefficient in half

In summary, the conversation discusses the potential effects of reducing a car's drag coefficient on its mileage. The article estimates that a halving of the drag coefficient could result in an extra 2.5 miles per gallon. However, this improvement is dependent on various factors such as speed, weight, and engine efficiency. The conversation then considers the potential mileage of a Tesla Model S with a reduced drag coefficient, but acknowledges that it is purely speculative. Ultimately, the best way to improve a vehicle's mileage is to make it smaller, lighter, and equipped with a smaller engine, but consumer demand for larger and more powerful vehicles makes this difficult to achieve.
  • #1
Curious007
46
1
I was wondering what would be the car mileage, if we reduce the current Drag coefficient from 0.30 to 0.15? Or to 0.10?
 
Engineering news on Phys.org
  • #2
That's not a simple question to answer. You'd need to know exactly how much of a car's energy is used up overcoming drag as opposed to overcoming the various other losses in the system. The best you could say is that the losses due to drag would also be halved.
 
  • #4
Thank you,
According to that article, if we reduce nearly half the drag, we will gain around 2.5 miles per gallon extra. I was hoping to get higher mileage advantage that that :)
 
  • #5
Again, there are many variables in the equation. Looking at speed, weight, and efficiency of the engine, are all important.
The reduction of drag reduces the load on the engine. By cutting resistance in half, you get closer to the unloaded efficiency of the motor.
This might be a greater improvement for smaller engines than for larger engines designed to handle heavy loads.
Is there a particular speed you are concerned about? Type of vehicle? Size of engine?
 
  • #6
I'm thinking about Tesla Model S. Let's say if we reduce the drag to 0.06 from 0.24, How far the car could run on single charge. Currently they say it runs 200 miles or so. I know they won't be able to reduce the drag so low... but this is just imaginary situation I'm thinking of.
 
  • #7
Say you had a fixed journey of say 10,000 m to travel in a given time, i.e. at a given speed, then with a fixed set of vehicle variables (drag coefficient, rolling resistance coefficient, vehicle mass) you could figure the energy required (Power required * time) to complete the journey, then change the drag coefficient to any other value, recalculate and compare.
 
  • #8
the simplest approach to enhance a vehicle's mileage is to make it littler and lighter and give it a littler motor. In any case, we need 400-hp sports autos and seven-traveler SUVs and 5,000-pound-limit tow vehicles — and we need great gas mileage, as well.
 

Related to Car mileage after reducing Drag Coefficient in half

1. How does reducing drag coefficient affect car mileage?

Reducing drag coefficient can improve car mileage by reducing the amount of air resistance that the car experiences while in motion. This allows the car to move more efficiently and use less energy, resulting in improved fuel efficiency.

2. What is drag coefficient and how is it related to car mileage?

Drag coefficient is a measure of the resistance an object experiences when moving through a fluid, such as air. In the context of cars, a lower drag coefficient means there is less resistance from the air, resulting in improved car mileage.

3. Can reducing drag coefficient lead to significant improvements in car mileage?

Yes, reducing drag coefficient can lead to significant improvements in car mileage. Studies have shown that even a small reduction in drag coefficient can result in a noticeable increase in fuel efficiency.

4. How can drag coefficient be reduced in a car?

There are several ways to reduce drag coefficient in a car, including making changes to the body design, adding aerodynamic features such as spoilers or air dams, and using lightweight materials. Additionally, maintaining proper tire pressure and removing unnecessary weight from the car can also help reduce drag coefficient.

5. Are there any downsides to reducing drag coefficient in a car?

While reducing drag coefficient can lead to improved car mileage, there are also potential downsides to consider. These may include increased manufacturing costs for more aerodynamic designs and potential trade-offs in terms of aesthetics or performance. Additionally, certain aerodynamic features may not be practical for everyday use or may only be effective at high speeds.

Similar threads

  • Introductory Physics Homework Help
2
Replies
57
Views
749
Replies
8
Views
3K
Replies
3
Views
1K
Replies
2
Views
2K
  • Aerospace Engineering
Replies
5
Views
681
Replies
1
Views
654
Replies
5
Views
1K
Replies
4
Views
431
  • Aerospace Engineering
Replies
3
Views
474
Replies
4
Views
108
Back
Top