In summary, to calculate absorbed dose in Fluka, you will need to use the USRBIN card. This card allows you to specify a volume of interest, material, particle type, and scoring type. The scoring type should be set to DOSE for absorbed dose calculations. After setting up the card and running the simulation, the output will contain the absorbed dose for the specified region.
#1
emilmammadzada
109
18
TL;DR Summary
Absorbed dose calculating in Fluka
Hello experts . How can i calculating absorbed dose in Fluka?
The absorbed dose in Fluka can be calculated using the USRBIN card. This card allows you to specify a volume of interest and the type of scoring which is to be done. The USRBIN card is typically used to calculate the average energy deposited in a region of interest, but it can also be used to calculate the absorbed dose.
To do this, you will need to specify the region of interest you wish to score, the material in that region, the particle type, and the scoring type. For absorbed dose, the scoring type should be set to DOSE.
Once the USRBIN card has been set up, you can run the simulation and the output will contain the absorbed dose for the region specified.